filename: TFS110AA.doc version 1.2 22.03.2011 vectron international filter specification tfs 110aa 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout measurement condition ambient temperature: 23 c input pow er level: 0 dbm terminating impedance: * input: 939 ? || -12,09 pf output: 809 ? || -11,79 pf ch aracteristics remark: the nominal frequency f n is fix ed at 110,6 mhz. the insertion loss a e is defined as loss v a lue determined at f n. reference lev e l for the relativ e attenuation a rel of the tfs 110aa is the insertion loss a e . the centre frequency f c is the arithmetic m ean v a lue of the upper and low e r frequencies at the 3 db filter attenuation lev e l relativ e to the insertion loss a e . all specified data are met w i thin the operating temperature range. d a t a ty p. v a lue tolerance / limit insertion loss a e 7 , 0 d b m a x . 9 , 5 d b (reference level) nominal frequency f n - 1 1 0 , 6 m h z centre frequency f c 1 1 0 , 6 m h z - passband p b - f n 0,1 mhz a m plitude ripple w i thin pb 1 , 5 d b m a x . 3 d b relativ e attenuation a rel f n ? f n 0 , 1 mhz 1 , 5 d b m a x . 3 d b f n 0 , 5 m h z ? f n 6 mhz 38 db min. 33 db f n 6 m h z ? f n 10 mhz 47 db min. 40 db group delay ripple w i thin pb p-p 300 ns max. 700 ns operating temperature range otr - - 20 c ... + 70 c storage temperature range - - 40 c ... + 85 c frequency inv e rsion temperature - - temperature coefficient of frequency t c f ** -0,04 ppm/k 2 - *) the terminating impedances depend on paras itics and q-v a lues of matching element s and the board used, and are to be understo od as reference v a lues only . should there be additional ques tions do not hesitate to ask for an applic ation note or contac t our design team. **) ? f(h z ) = t c f (ppm/k 2 ) x (t-t 0 ) 2 x f cat (mhz). ge ne ra te d: ch ecked / a p p r o v ed : notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: TFS110AA.doc version 1.2 22.03.2011 vectron international filter specification tfs 110aa 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com f ilter ch aracteristic 10 2.6 10 4.6 106 .6 108 .6 110. 6 112.6 114.6 1 16.6 1 18. 6 -70 -60 -50 -40 -30 -20 -10 0 fr e q u e n c y i n m h z m a gn i t ud e in d b 110 11 0.2 110 .4 110 .6 110. 8 11 1 1 11.2 - 1 0 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 fr e q u e n c y i n m h z m a gn i t ud e i n db 110 11 0.2 110 .4 110 .6 110. 8 11 1 1 11.2 0 1 2 3 4 5 6 7 8 9 10 fr e q u e n c y i n m h z d e l ay i n s cons truc tion a nd pin c onne c t ion (all dimensions in mm) d a te c o d e 11 , 5 +/ - 0 , 2 5, 1 +/ - 0 ,2 1 3 1, 8 +/ -0 , 2 5, 08 + / - 0 , 2 0, 8 + / - 0, 2 1, 0 +/ -0 , 2 2, 54 + / - 0 , 2 1 23 4 5 6 7 8 9 10 50 oh m t est circu i t tfs 110aa b13 1 ground 2 ground 3 ground 4 output 5 output rf return 6 ground 7 ground 8 ground 9 input 10 input rf return date code: y ear + w eek a 2010 b 2011 c 2012 ... c1 l1 sa w l 2 c2 vectro n reserves the right to make changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: TFS110AA.doc version 1.2 22.03.2011 vectron international filter specification tfs 110aa 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff di r e c t io n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 24 0,3 po : 4 0,1 do : 1,5 + 0,1 e : 1,75 0,1 f : 11,5 0,1 g (min) : 0,6 p2 : 2 0,1 p1 : 8 0,1 d1(min) : 1,5 a o : 5,5 0,1 bo : 11,9 0,1 ct : 21,5 0,1 reel (all dimensions in mm): a : 330 w1 : 24,4 +2 w2 (max) : 30,4 n (min) : 60 c : 13 +0,5/-0,2 a c n w 1 w2 the minimum bending radius is 45 mm. vectro n reserves the right to make changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: TFS110AA.doc version 1.2 22.03.2011 vectron international filter specification tfs 110aa 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s vectro n reserves the right to make changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
filename: TFS110AA.doc version 1.2 22.03.2011 vectron international filter specification tfs 110aa 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com history ve rs ion re a s on of cha nge s name date 1.0 - development specification pfeiffer 04.02.2010 1.1 - changed centre freq. from 110.592 to 110.6mhz a. hodkin 21.04.2010 1.2 - change from development spec to filter spec molke 22.03.2011 - ty pical values added - filter characteristic added vectro n reserves the right to make changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation.
|